Bisil Thermo Fire-Resistant Paint 700 °C, 0199 Black, 350 g

The paint is specially manufactured to protect steel and cast iron surfaces exposed to cyclic thermal stress. It is used for protective coatings on fireplaces, flues, steam pipes, engines, heat exchangers, solar collectors...

The paint is intended for the finishing of surfaces of steel and cast iron items and structures exposed to one-time or cyclic thermal stress. The paint is formulated based on premium silicone resin using modern inorganic spinel pigments that do not degrade even at temperatures around 700 °C.

The paint can be used for treating the metal parts of fireplaces, stoves, flues, steam pipes, engines, heat exchangers, solar collectors. The paint is suitable for coatings or spraying on structures that are subjected to temperatures up to 700 °C short-term, and long-term up to 550 °C.

Procedure:
1.) The paint is applied with a brush, roller, spraying, or dipping. It is preferable to paint the first layer. Maintain at least 4 hours between individual layers under normal conditions.
2.) It is optimal to let each layer dry and cure at a temperature of 230 °C for 30 minutes.
3.) The coating system does not need to be cured, but it is softer and does not withstand the action of organic solvents. When subsequently curing the entire coating system, pay attention to a gradual increase in temperature!!! The most suitable preparation of the steel and cast iron substrate is sandblasting.

Substrate:
Remove rust and old degraded coatings and degrease the substrate! Optimal degreasing of the substrate ... e.g., 2 × coating with the special preparation IZOKOR. Next follows the actual coating system, usually 2 × CORSIL + min. 2 × BISIL Thermo. For substrate preparation and application of the coating system, we recommend adhering to the principles of the technical standards ČSN EN ISO 12944 1-8 and accompanying regulations ČSN ISO 8501 1-2, 8502 2-6, ... .

Product safety warnings (H-statements)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P240: Ground container and receiving equipment.
• P241: Use explosion-proof electrical/ventilating/lighting/... equipment.
• P242: Use only non-sparking tools.
• P243: Take preventive measures against static discharge.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P321: Specific treatment (see … on label).
• P362: Take off contaminated clothing.
• P370+P378: In case of fire: Use extinguishing agent according to safety data sheet/fire sand/carbon dioxide for extinguishing.
• P391: Collect spillage.
• P403+P235: Store in a well-ventilated place. Keep cool.
• P501: Dispose of contents/container in accordance with product instructions.