FEST-B S2141, anti-corrosive paint for iron, 0101 light grey, 800 g

Anti-corrosive self-priming paint containing graphite

CHARACTERISTICS AND USE:

The paint is specifically designed for single-layer outdoor protective coatings of sheet metal roofing, gutters, steel structures and other metal objects exposed to permanent weather effects and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber that protects the paint binder from degradation. Protection against coating degradation is guaranteed by the addition of graphite - a Czech patent. Thanks to the graphite, the paint features long-term resistance to weather effects, water repellency, and effective barrier anti-corrosion protection.

Key properties:

• high durability
• barrier protection due to graphite
• excellent adhesion

SUBSTRATE PREPARATION:

The substrate must be clean, dry, mechanically cleaned, and free from grease, dust, and rust before application. First, it is necessary to degrease the surface with a suitable cleaning agent (e.g., BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone or, where possible, warm pressurized water with detergent). Any residues of salts should be washed off with clean water afterwards. Coarse and stubborn dirt must be removed manually or mechanically (by sanding or scraping). Any rust can also be removed manually or mechanically (using metal brushes, sanding discs) or by using rust removers. If you use a chemical rust remover, it is essential to rinse off with clean water afterwards. Coating on galvanized sheet metal can only be performed after one year of exposure to weather influences.
Porous substrates must first be impregnated with a suitable primer to ensure their even absorbency. Originally painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/kg for one layer

APPLICATION PROCEDURE:

Before use, thoroughly mix the contents and dilute if necessary.
Apply 2 to 3 coats (spray) with FEST-B 2-in-1 FOR ROOFS S2141 paint. The recommended thickness of the dry coating film for one layer is 50 µm. If necessary, additional sprayings or coatings can be applied either wet on wet (within approx. 3 hours) or after drying (after 24 h).
The method of application affects the final appearance of the coating. The structure of the contained graphite may cause color differences (shading) during spreading, which however do not affect the protective properties of the coating.

You might need masking material, such as paper adhesive tape or masking film, possibly sandpapers. Also remember to have brushes and rollers.

Product Safety Warning (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may create dangerous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/smoke/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: If unwell, call the POISON CENTER/doctor.
• P501: Dispose of contents/container according to instructions on the product.