Bisil waterproof paint for concrete, waterproof, 0100 white, 3.5 kg

Acrylic paint with increased resistance to UV radiation is intended for waterproof coatings of pool walls, water reservoirs, and silage pits, as well as for surface treatment of steel structures or asbestos roofs. The paint has a certification for direct contact with drinking water, food, and for the treatment of toys.

Application:
The paint is designed for the finishing treatment of surfaces of steel and cast iron objects and structures exposed to aggressive weather conditions, permanent moisture, and long-term underwater exposure. It can be used for waterproof coatings of walls in water reservoirs and silage pits. Based on the health safety of the cured film of the paint, it is used for protective coatings of swimming pools and bathhouses, in food processing facilities with frequent washing and constant humidity. It is suitable for surface treatment of asbestos roofs and wooden elements. On concrete, it is used to protect against water and moisture penetration. It withstands common concentrations of inorganic acids, bases, and some higher fraction petroleum products (from LTO and above).

Work procedure:

1. The coating should be applied in at least two layers. Under normal conditions, the optimal thickness of the cured Bisil layer is 80-120 um (3 layers).
2. With long-term exposure under water, the number of layers increases to 5 (250 um).
3. Application can be done by brush, roller, dipping, or spraying. The first coat is always better applied with a brush, while subsequent layers are more conveniently applied by spraying. Under normal conditions, we recommend maintaining a gap of at least 4 hours between layers. Thorough drying of previous layers is crucial. When creating protective coatings on metal surfaces, it is necessary for the substrate to be adequately coated with a suitable anti-corrosion base paint (BILAK Zn Prim, GLASFIX Zn, S2102, S2000, Unipur base) before applying the paint.

You may also find covering material, such as paper masking tape or covering foil, and possibly sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H312: Harmful in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs through prolonged or repeated exposure.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
• P303+P361+P353: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• P370+P378: In case of fire: Use extinguishing measures according to safety data sheet/fire extinguisher/sand/carbon dioxide.