HET lime paint, white, 6 kg

The traditional lime paint is an ideal choice for utility and agricultural buildings, storage spaces, and less demanding surfaces. Substrate material is masonry, plaster, concrete, and concrete panels. White shade. Among the main advantages of lime paint are water dilutability, disinfecting effect on the substrate, prevention of mold growth, high vapor permeability, favorable price, and the possibility of application both indoors and outdoors.

Coverage:
2.5 - 5 m²/kg in one layer depending on the thickness of the coat, absorbency, and structure of the substrate.

Drying time:
At least 4 hours at 20 °C and 60% relative humidity.

Storage:
24 months from the date of production in the original unopened packaging, at a temperature of +3 to +30 °C, protect from frost and direct sunlight.

Example of application procedure:

1. Cover windows, radiators, door frames, etc.
2. New plasters should be lightly misted with a sprayer before application to prevent the substrate from absorbing too much water from the paint. However, the substrate should not be too saturated with water, as it would risk reducing the paint's adhesion to the substrate and causing defects.
3. The primer coat is applied with paint diluted with approximately 0.5 - 0.75 liters of water per 1 kg of material. The amount of water must be adjusted for all paints based on the application method, temperature, and nature of the substrate. Mix thoroughly before application. During handling or mixing, ensure that air does not penetrate into the paint. Occasional stirring is also necessary during the actual application.
4. After the primer coat has cured (carbonization), at least 3 finish coats are applied using paint diluted with approximately 0.3 - 0.6 liters of water per 1 kg of paint. The coating procedure is best carried out using the so-called “glazing” method, applying multiple, as thin as possible, layers of paint in circular motions, and always after each layer has cured.
5. Other areas must be protected with cover materials against splashes; in case of splashes, clean immediately with water.

Covering materials such as covering film or paper adhesive tape, and possibly sanding papers, will also come in handy. Don't forget brushes, rollers, and spatulas.

Product safety warnings (H-phrases)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P304+P340: IF INHALED: Transfer the person to fresh air and keep them in a position comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor.
• P501: Dispose of contents/container according to the instructions on the product.