Het Hetmal Plus paint, 15 + 3 kg

Interior dispersion white covering paint Het Hetmal Plus with high covering capacity - recommended for commercial and living spaces, offices, schools, corridors, industrial applications. Het Hetmal Plus is suitable for indoor wall and ceiling coatings, lime and lime-cement plasters, concrete panels and monoliths, specially designed paper wallpapers, etc. The paint is suitable for repainting old load-bearing layers of interior paints. The product meets the requirements for coatings of surfaces that may come into indirect or direct incidental contact with food. The coating creates a matte, vapor-permeable surface that is resistant to standard humidity in rooms and resistant to dry abrasion. The painted surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can briefly withstand temperatures around 70 °C. Het Hetmal Plus paint is suitable for painting living and commercial spaces, corridors, offices, schools, industrial areas, etc. Increased whiteness 93 % (MgO), high coverage, matte appearance, resistance to dry abrasion, vapor permeability, easy tinting

Shade:
white, tinting can be done with HETCOLOR tinting colors (max. in the ratio of 1:5 parts paint)

Coverage:
8 - 12 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer

Drying time: 
at least 4 hours at 20 °C and 60 % relative humidity

Application:
with a brush, paint rollers (perlon, polyacrylic, polyamide), small areas with a brush, large area application by AIRLESS spraying. When spraying, it is advisable to conduct tests on the specific equipment beforehand. The temperature of the material, environment, and substrate must be in the range of +5 to +30 °C during application and for 24 hours after application.

Substrate:
dry, cohesive, free of dirt and biological attack (mold, algae), unsalted, non-greasy, free of formwork oils, chemically stable, matured (pH ≤8.5; a pH tester can be used for control).

Example of the application procedure:

1. before application, the paint must always be thoroughly mixed. When mixing, take care to avoid air entering the material and foaming the paint.
2. the primer coat is made with paint diluted with 0.5 l of water per 1 kg of paint. For smooth substrates, a penetrating agent UP-GRUND is used for the primer coat, very absorbent substrates are primed with products A-GRUND or AT-GRUND. If the substrate is a cohesive, non-flaking, poorly absorbent original coating, a primer coat is not necessary. Layers
   of old coatings with insufficient adhesion must be scraped off beforehand. Stains from infiltrated water, rust, soot, aniline dyes, or nicotine must first be covered with the insulating coating I-GRUND or, in case of greater intensity, with HETLINE IZOL paint.
3. after the primer coat has dried, apply 1 to 2, or more as needed for new or significantly differently colored substrates, covering coats with paint diluted with a maximum of 0.3 liters of water per 1 kg of paint. WARNING: excessive dilution of paint decreases coverage and may lead to worsening of paint parameters.
4. protect all tools during work breaks from drying out and wash them with water after work. Clean contaminated areas immediately with water, dried paint is difficult to remove. Ensure thorough ventilation during application and drying.