Het Klasik Premium Paint, 7+1 kg

High white interior paint is intended for painting ceilings and walls, lime, gypsum, lime-cement, and gypsum-lime plasters, gypsum boards, wood fiber and cement-bonded boards, acrylic binder-containing plasters, renovation plasters (complies with the requirements of the WTA CZ directive No. 2-9-04/D, table 4 limiting the application of covering layers on renovation plasters from the point of view of vapor permeability), concrete monoliths and panels, suitable paper wallpapers, fiberglass wallpapers, etc. It is also suitable for combined substrates, such as gypsum board connected with mineral plasters. The product meets the standards for surfaces coming into indirect contact with food. The resulting coat is matte, highly vapor-permeable, resistant to normal room humidity, and abrasion by dry cloth. The treated substrate must not be permanently exposed to water or condensation moisture. Once dry, the coating can withstand short-term temperatures around 70 °C. The paint can be used for painting residential and representative spaces, children's rooms, dining rooms, hallways, offices or shops.

Top whiteness min. 97% MgO, higher coverage, excellent opacity, high resistance to dry abrasion, great workability, minimal splatter during application, fine matte appearance, excellent water vapor permeability, suitability for coating renovation plasters. Recommended for representative residential and commercial interiors, such as living rooms, dining rooms, bedrooms or offices.

Application:
For coating mineral plasters including gypsum and renovation plasters, masonry, gypsum board, cement-bonded and wood-fiber boards, concrete panels and monoliths, designated paper wallpapers, fiberglass wallpapers.

Shades:
White, for tinting, it is possible to use tinting colors HETCOLOR or KOLORKA preparations (up to a ratio of 1 : 5 parts of paint), or the shade can be adjusted by mixing with the product KLASIK COLOR.

Coverage:
7 – 11 m²/kg in one layer depending on absorbency, substrate structure, and thickness of the applied layer.

Application methods:
With a roller, brush, or Airless spraying.

Application procedure:

1. For less absorbent and extremely smooth substrates (gypsum board, gypsum fillers, etc.), the primer coat is applied with the penetrating preparation UP-GRUND; for highly absorbent substrates, the preparations A-GRUND or AT-GRUND. If the paint is used as a primer, it is diluted with water max. 0.3 l per 1 kg of paint. If the substrate is a non-powdery, less absorbent original paint film, priming is unnecessary. Old layers of paint with insufficient adhesion are recommended to be scraped off.
2. After drying the primer, apply 1–2 top coats of paint diluted with max. 0.1 liters of water (roller) or 0.3 liters of water (brush) per 1 kg of paint. On new or significantly color-different substrates, more top coats can be applied as needed.