Industrol S2013 universal gloss top coat for metal and wood, 1110 light grey, 4 l

Top synthetic glossy enamel for wood and metal

CHARACTERISTICS AND USE:

The product is intended for top glossy coatings of metals, wood, and materials such as masonry for outdoor and indoor use. The substrate must always be treated with a suitable primer. The product has excellent coverage, high gloss, and very good weather resistance. It has good flow and workability. It is available in a wide range of shades. The product has long-term storability during which there is no change in the functional properties of the coating material. The product is suitable for painting fences, doors, frames, window sills, small constructions, industrial items, wooden furniture and paneling, garden furniture, washable and abrasion-resistant wall coatings.

Key features:

• Long-term resistance to weather conditions
• Stable gloss
• Urethane-based binder

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, free from resin residues before application. The concrete or masonry substrate must be dry, cohesive, cleaned, well-cured (usually 4-6 weeks), and structurally insulated against ground (bottom) moisture. The metal substrate must be clean, dry, free of grease, rust, and dust, mechanically cleaned. Absorbent substrates must be treated with a suitable primer and possibly covered with an appropriate base coat. Metal substrates must be primed with a suitable anti-corrosive substance. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 14 - 16 m2/l in one layer

APPLICATION PROCEDURE:

Before use, thoroughly mix the contents and dilute if necessary.

Coating metal objects:
1.) 1x PRAGOPRIMER STANDARD S2000 or FORMEX BASE FOR GALVANIZED S2003, PRAGOPRIMER UNIVERSAL S2035
2.) local filling with filler, sanding the filled area with sandpaper
3.) 1x PRAGOPRIMER STANDARD S2000 or PRAGOPRIMER UNIVERSAL S2035
4.) sanding with sandpaper #280-320 wet
5.) 2 to 3x INDUSTROL UNIVERSAL S2013 paint

Coating wooden objects:
1.) 1x treat with Lazurolem Classic S1023, drying time 24 hours.
2.) 1-2x PRAGOPRIMER PLUS S2070 or LAZUROL OKNOBAL BASE S2060 paint.
3.) 2-3x INDUSTROL UNIVERSAL S2013 enamel. Each coat of enamel must dry for at least 24 hours (20 °C).

You may find it useful to have covering material, such as paper masking tape or covering film, and possibly sandpapers. Don’t forget brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause dry skin or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe aerosols or mist.
• H226: Flammable liquid and vapour.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapours/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P314: Get medical advice/attention if you feel unwell.
• P501: Dispose of contents/container to the instructions on the product.