LAZUROL Oknobal base wood color S2060, white, 600 ml

Basic synthetic wood paint.

CHARACTERISTICS AND USE:

The paint is intended for primer and base coatings for surface treatment systems of wooden products exposed to direct weather influences, e.g., wooden windows, frames, or doors. It is also suitable for indoor use, e.g., wooden furniture including wooden kitchen paneling and fiberboard. The coating stands out with very good opacity, good flow, and quick drying. The coating has high filling capacity and is easy to sand.

Key properties:

• excellent sandability
• high opacity
• increases adhesion of the topcoat

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with moisture max. 12%, free from resin residues before application. Wood with a high resin content (larch, pine) must be free from any resin exudations, e.g., by washing with nitro thinner C 6000. The quality of wood pre-treatment affects the overall appearance of the final wood surface treatment and the overall durability of the coating system.
The surface of the wood must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate and higher protection of the wood (in the case of using a fungicidal primer, also protection against wood pests, fungi, and insects). Subsequently, the surface of the wood must be sanded with fine sandpaper before applying the wood primer. When renovating coatings, the wood must be stripped of old non-adherent coatings and ensure good substrate adhesion (when completely removing the old coating, the new coating is done gradually, including wood impregnation).

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical efficiency: 15 - 17 m2/l

WORKING PROCEDURE:

Before use, the contents must be thoroughly mixed. It is not diluted, the paint is already at application viscosity.
Indoor wood painting
1. 1x priming the substrate with LAZUROL CLASSIC S1023 or UNIBAL IMPREGNATING VARNISH O1000, 24 hours drying, sanding
2. 1 to 2x coating with LAZUROL OKNOBAL BASE S2060 (recommended interval between coats is 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 1 to 2x coating with topcoat LAZUROL OKNOBAL E-MAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Outdoor wood painting
1. 1x priming the substrate with fungicidal primer LAZUROL IMPREGNATING BASE S1033, 24 hours drying; sanding
2. 1 to 2x coating with LAZUROL OKNOBAL BASE S2060 (recommended interval between coats is 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 2 to 3x coating with topcoat LAZUROL OKNOBAL E-MAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be created during spraying. Do not breathe aerosols or mist.
• H226: Flammable liquid and vapours.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/protective goggles/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell.