Lazurol Aqua P UREX V1301 glossy durable wood lacquer transparent, 5 kg

Water-thinnable acrylic-urethane lacquer for wood in indoor spaces. The product is intended to create a highly durable and quality surface for all types of wooden floors made of both soft and hard wood in interiors. It is also suitable for finishing furniture parts, plywood, wooden panels, cork, etc., or as a final protective coating on dispersion paints.

It meets the slip resistance requirements in both dry and wet conditions (ČSN 744507) for flooring areas in all residential and commercial spaces and parts of public buildings – the average value of the coefficient of friction for the entire set is at least 0.5. It also complies with the norm ČSN EN 71-3, part 3: toy safety. Migration of certain elements.

Properties of Lazurol Aqua P UREX V1301 durable wood lacquer:

• Coverage: 8 - 12 m² / kg in one layer.
• Type of layer: top transparent lacquer.
• Application methods: brush, roller, and spraying (including AIRLESS system).
• Use on wood: wooden floors and stairs, parquet, cork, lacquered furniture, lacquered doors.
• Intended use: interior – indoor spaces.

Application procedure:

Before use, thoroughly mix the lacquer. The temperature during application must be between +15 °C and +25 °C. It is applied with a brush, roller, or by spraying. The surface of the wood to be lacquered must be free of dirt, dust, and old non-adherent coatings. Resinous spots must be cleaned with thinner and the surface carefully sanded using graduated sanding paper P80-100-120-150 (grit adjusted to the condition, type, and quality of the substrate). After removing the dirt generated during sanding, one layer of lacquer diluted by a maximum of 10% water is applied. After 2 hours of drying, the surface should be lightly sanded with sanding paper P220-400. After again removing the dirt generated during sanding, two layers of undiluted lacquer are applied with a time interval of 2-8 hours. If the time interval between individual coats is more than 8 hours, light sanding with sanding paper P220-400 is recommended.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H317: May cause an allergic skin reaction.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.