Bison Epoxy Universal high-strength two-component epoxy adhesive with a workability of 90 minutes 24 ml
odolává vodě, vlhkosti, olejům, rozpouštědlům, ředěným kyselinám a louhům
The operating temperature is +5° to +35°C. Glued parts must be clean, dry and degreased. Remove the cap of the two-shot. Squeeze out the filler and hardener in a volume ratio of 1 : 1 (two equal strips) and mix well. The workability of the adhesive is 90 minutes at room temperature. Apply the adhesive on one side, or on both sides for rough and porous materials, press both surfaces togEther and fix (using clamps or tape). Clean and close the ends properly (the cap must be broken out of the pistons of the double injector). Store in a dry and cool place.
Resin: hazard to the AQUAtic environment - chronic hazard (Cat.2), skin corrosion/irritation (cat.2), serious eye damage/irritation (cat.2), sensitization (cat.1). Hardness: skin corrosion/irritation (Cat.1), hazard to the AQUAtic environment - chronic hazard (cat.2), sensitization (cat.1).
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
The operating temperature is +5° to +35°C. Glued parts must be clean, dry and degreased. Remove the cap of the two-shot. Squeeze out the filler and hardener in a volume ratio of 1 : 1 (two equal strips) and mix well. The workability of the adhesive is 90 minutes at room temperature. Apply the adhesive on one side, or on both sides for rough and porous materials, press both surfaces togEther and fix (using clamps or tape). Clean and close the ends properly (the cap must be broken out of the pistons of the double injector). Store in a dry and cool place.
Resin: hazard to the AQUAtic environment - chronic hazard (Cat.2), skin corrosion/irritation (cat.2), serious eye damage/irritation (cat.2), sensitization (cat.1). Hardness: skin corrosion/irritation (Cat.1), hazard to the AQUAtic environment - chronic hazard (cat.2), sensitization (cat.1).