Bison Liquid Rubber liquid rubber 50 ml blister, transparent paste for repair, protection and impregnation of thousands of different objects
Roughen the material. Surfaces must be clean, dry, free of dust and grease. Apply a layer of min. 2 mm and spread the paste. Shoe/boat repairs: apply a thin layer (max. 1 mm) and press the polyester patch (min. width 2,5 cm) into the paste. Spread a layer of paste on the polyester patch and the surrounding area.
Curing time: 48 hours. Remove wet spots immediately with acetone.
IMPORTANT:
Do not use at temperatures below +5°C. After use, close the container properly and store it in a dry, cool place protected from frost. The minimum shelf life is 24 months. When opened, it shortens.
Keep out of reach of children. Ensure adequate air supply when breathing. If contact with eyes, rinse immediately with Water. If swallowed, do not induce vomiting and seek medical attention immediately.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
Roughen the material. Surfaces must be clean, dry, free of dust and grease. Apply a layer of min. 2 mm and spread the paste. Shoe/boat repairs: apply a thin layer (max. 1 mm) and press the polyester patch (min. width 2,5 cm) into the paste. Spread a layer of paste on the polyester patch and the surrounding area.
Curing time: 48 hours. Remove wet spots immediately with acetone.
IMPORTANT:
Do not use at temperatures below +5°C. After use, close the container properly and store it in a dry, cool place protected from frost. The minimum shelf life is 24 months. When opened, it shortens.
Keep out of reach of children. Ensure adequate air supply when breathing. If contact with eyes, rinse immediately with Water. If swallowed, do not induce vomiting and seek medical attention immediately.
