HG Mold Remover, 500 ml

Mold, moisture, or water stains often appear on the silicone seals between the bathtub and the tiles, in the shower stall, or on the plaster. This mold spray is also suitable for cleaning tiles, seals around pools, and various surfaces in the garage, shed, sauna, and in the conservatory or greenhouse.

We also offer a foam mold remover: HG Mold Remover. This formulation has a unique composition in the form of foam with a mild fragrance and can be easily sprayed directly onto the mold. A mold remover that does not stain surrounding areas.

Features:

• For tiles, silicone seals, plaster, etc.
• Self-acting
• Results in just 30 minutes

Instructions:

For proper use of the HG Mold Remover, follow the instructions below.

Do not remove mold from the top. Press the nozzle at the front and turn a quarter turn. Spray the surface from a distance of 3 – 5 cm. In case of heavy contamination, spray the surface again after 30 minutes and leave for another 30 minutes. Then wash the surface with a sponge and water. After 30 minutes, wash elastic joints (e.g., silicone sealant) and reapply the spray. After use, turn the nozzle a quarter turn back (secured position).

To clean larger areas covered with green deposits, we recommend using HG Green Deposits and Moss Remover. If inhaled, move the affected person to a clean environment. Seek medical assistance if symptoms occur. If breathing stops, provide artificial respiration. If swallowed, do not induce vomiting; if possible, administer 3 tablets of medicinal activated charcoal crushed in a glass of water and seek medical assistance. Wash contaminated skin thoroughly with plenty of lukewarm water and soap. If in eyes, rinse eyes with a steady stream of clean water for at least 10 minutes and seek medical treatment. Place unconscious persons in a stable position and seek medical assistance.

Use biocides safely. Always read the label and product information before use.

HG Mold Remover has a bleaching effect. If in doubt about its suitability, test the product in an inconspicuous place first.

Mold, moisture, or water stains often appear on the silicone seals between the bathtub and the tiles, in the shower stall, or on the plaster. This mold spray is also suitable for cleaning tiles, seals around pools, and various surfaces in the garage, shed, sauna, and in the conservatory or greenhouse. We also offer a foam mold remover: HG Mold Remover. This formulation has a unique composition in the form of foam with a mild fragrance and can be easily sprayed directly onto the mold. A mold remover that does not stain surrounding areas.

Use biocides safely. Always read the label and product information before use.

Product Safety Warnings (H-statements)

• EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
• H314: Causes severe skin burns and eye damage.
• H410: Very toxic to aquatic life with long-lasting effects.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P264: Wash all exposed parts of the body thoroughly after handling, for example, hands
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P303+P361+P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water/shower.
• P305+P351+P338+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
• P310: Immediately call a POISON CENTER/doctor
• P501: Dispose of contents/container in accordance with local regulations.