Diluents, solvents

Used as a thinner for oil paints, for making varnishes, and as a raw material in the chemical industry. By adding it to paints, a smooth, enamel-like surface is created without visible brush strokes. Turpentine is also added to many cleaning and sanitary products.

Toluene is intended as a solvent for special purposes, e.g. for thinning chlorinated rubber and some other rubber adhesives. FOR PROFESSIONAL USERS ONLY!

S 6005 is a thinner designed for thinning synthetic paints applied by spraying or dipping. The type of thinner according to the method of application of the coating is always indicated on the packaging of individual coatings.

Thinner for thinning nitrocellulose and synthetic coatings. Also used for cleaning tools and equipment, for removing resins from the surface of wood.

For thinning epoxy or epoxyester coatings. S 6300 can only be used to thin coatings for which this thinner is recommended by the manufacturer. It is most commonly used with two-component epoxy paints and varnishes.

For diluting epoxy or epoxy ester coatings. S 6300 can only dilute those coatings for which this thinner is recommended by the manufacturer. It is most commonly used with two-component epoxy paints and coatings.

For thinning epoxy or epoxyester coatings. S 6300 can only thin those coatings for which this thinner is recommended by the manufacturer. It is most commonly used with two-component epoxy paints and lacquers.

Used for thinning oil and synthetic coatings that dry in air, intended for application by brush. Added gradually while stirring continuously.

Rinse-free rust removal agent with a stabilizer, high efficiency in removing rust.

Vhodný pro optiku, tištěné spoje, elektrické kontakty, skleněné plochy. Rozpouštědlo pro oleje, gumu, pryskyřice, lepidla, barvy, inkoust.

Thinner or solvent is used to improve the spreadability of paints, to clean brushes, and to remove old coatings. Thinner C6001 is suitable for diluting fast-drying synthetic coatings, particularly suitable for spraying.