BALTECH rust remover, rinse-free, 500 ml

Rinse-free rust removal agent with a stabilizer, high efficiency in removing rust. The rust remover is applied by painting, spraying, or dipping. In case of severe corrosion, the application of the rust remover should be repeated 2 to 3 times.

Substrate preparation:
The area to be descaled should first be roughly mechanically cleaned with a brush to remove loosely adhering rust particles and dirt.

Instructions for use:
Before use, mix the rust remover solution. The rust remover is applied by painting, spraying, or dipping. In case of severe corrosion, the application of the rust remover should be repeated 2 to 3 times. For dipping, the application time is 5 minutes. The effect of the rust remover is indicated by the formation of a blue-black coloration on the surface of the object. The treated surface should be allowed to dry under normal climatic conditions for at least 24 hours, before surface treatment, wipe off the resulting white-gray dry powder with a cloth and proceed with further treatment using standard paints without rinsing.

Thinner:
Water

Coverage:
500 g of rust remover is sufficient to treat 10-40 m2 of metal surface

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H319: Causes serious eye irritation.

Precautions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.