BALTECH rust remover, rinse-free, 500 ml - spray

Rinse-free agent for removing rust with action stabilizer, effectively removes corrosion. In case of severe corrosion, the application of the rust remover should be repeated 2 to 3 times.

Surface preparation:
First, the area designated for rust removal should be roughly cleaned mechanically with a brush to remove loosely adhering corrosion particles and dirt.

Instructions for use:
Before use, the rust remover solution should be mixed. In case of severe corrosion, the application of the rust remover should be repeated 2 to 3 times. The effect of the rust remover is manifested by the formation of a blue-black coloring on the surface of the object. The treated surface should be allowed to dry under normal climate conditions for at least 24 hours; before further surface treatment, wipe off the resulting whitish-gray dry powder with a cloth and continue to treat it with common coating materials without rinsing.

Diluent:
Water

Coverage:
500 g of the rust remover is sufficient to treat 10-40 m² of metal surface

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H319: Causes serious eye irritation.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.