BALTECH rust remover, rinse-free, 5 l

Rinse-free rust removal agent with a stabilizer for effectiveness, high efficiency in removing corrosion. The rust remover is applied by brushing, spraying, or immersion. In cases of severe corrosion, it is necessary to repeat the application of the rust remover 2 to 3 times.

Surface preparation:
The area intended for rust removal should first be roughly cleaned mechanically with a brush to remove loosely adhering rust particles and dirt.

Instructions for use:
Before use, the rust remover solution should be mixed. The rust remover is applied by brushing, spraying, or immersion. In cases of severe corrosion, it is necessary to repeat the application of the rust remover 2 to 3 times. In the case of immersion, the application time is 5 minutes. The effect of the rust remover is indicated by the formation of a blue-black coloration on the surface of the item. The treated surface should be allowed to dry under normal climatic conditions for at least 24 hours, before surface treatment wipe off the resulting whitish, dry powder with a cloth and continue to work with ordinary paint materials without rinsing.

Diluent:
Water

Yield:
500 g of rust remover is sufficient to treat 10-40 m2 of metal surface

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H319: Causes serious eye irritation.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.