Loctite Super Attak Ultra Plastik instant adhesive content 2g + activator, 4 ml

Loctite Super Attak Ultra Plastik is a special instant adhesive for bonding all types of plastics. It bonds PVC, PP, PE, nylon, vinyl, plexiglass, ABS, and other plastics. Do not use for bonding items that come into contact with liquids.

Characteristics of Loctite Super Attak Ultra Plastik instant adhesive:

• Specialist for all types of plastics.
• Special instant adhesive for bonding all types of plastics.
• Bonds PVC, PP, PE, nylon, vinyl, plexiglass, ABS, and other plastics.
• Do not use for bonding items that come into contact with liquids.
• Packaging: 2 g + activator (primer) 4 ml.

Application of Loctite instant adhesive:

1. Bonding surfaces must be clean, dry, and degreased. After cleaning, do not touch the bonding surfaces.
2. Apply the activator (primer) (tube no. 1) thoroughly on the entire surface of both bonded parts. Allow it to act for 1–2 minutes.
3. Close the activator (primer) thoroughly after use.
4. Apply the adhesive (tube no. 2) from the tube only to one of the bonded parts. Use approximately one drop of adhesive per 1 cm2. Do not spread the adhesive.
5. Quickly press both bonded parts together and hold firmly for 30 seconds. Then allow to set for a few minutes.
6. Close the tube after use.

Product safety warnings (H-statements)

• EUH202: Cyanoacrylate. Danger. Immediately bonds skin and eyes. Keep out of reach of children.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.

Safe handling instructions (P-statements)

• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501: Dispose of contents/container according to the product instructions.