Max Color primer for plastics, transparent, 400 ml

To improve the adhesion of paints on plastic materials. Apply in a thin layer directly on the plastic. Then use the primer. Essential for painting plastics containing polyethylene.

Procedure:

Degrease the plastic and let the degreaser ventilate for about 20 minutes. Then apply the primer on the plastics. After 20 minutes at 20°C, you can apply the filler or topcoat without sanding.

Use:

Primer for hard plastics such as bumpers, spoilers, mirror covers, and other plastic accessories, also as a primer for plastic suitcases, furniture, and toys

Substrate:

all plastics, except PE

Product safety warnings (H-statements)

• H222: Extremely flammable aerosol.
• H229: Container is under pressure: may burst when heated.
• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H319: Causes serious eye irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Protect from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor
• P332+P313: If skin irritation occurs: Seek medical advice/attention.
• P337+P313: If eye irritation persists: Seek medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.