
Pattex Profi Fix - nahrazuje hřebíky, šrouby a hmoždinky. Super silné a krátkodobě voděodolné lepidlo, které díky speciálnímu složení zajišťuje rychlou přilnavost a vysokou konečnou pevnost při použití v interiéru i exteriéru, pro savé i nesavé materiály (např. kov).
Rozsah použití:
k lepení soklových lišt, dřevotřískových a dřevovláknitých desek, sádrokartonu, korkových desek, dřevěných, kobercových nebo kovových lišt a polystyrenu k betonu, zdivu a dalším běžným stavebním materiálům. Není vhodný pro lepení zrcadel, PE, PP. Lepené spoje nevystavujte trvalému působení vody a vlhkosti.
Substrate preparation:
The surface must be clean, dry, free of dust and grease.
Workflow: apply the adhesive in vertical strips or in a serpentine pattern for best results. Do not apply near the edge. Apply the adhesive to one of the surfaces to be glued. Press the glued parts firmly together within 5 minutes of applying the glue, immediately separate again and allow to air out for 3-5 minutes (5-8 minutes for non-absorbent surfaces). Then press the two glued parts firmly together again. Final strength is achieved after 24 hours (absorbent) and 48 hours (non-absorbent surfaces). When applying to vertical surfaces, fix for min. 24 hours.
Cleaning:
Clean the tools and remove fresh adhesive residues immediately with contact adhesive cleaner or technical gasoline.
Technical data: colour: yellow-brown. Base: synthetic rubber. Density: 1,3-1,5 g/cm3. TOC: 0,21 kg/kg product. VOC: <0.01 kg/kg product.



