BALtech

Thinner for polyurethane coatings.

Thinner or solvent is used to improve the spreadability of paints, to clean brushes, and to remove old coatings. Thinner S6001 is suitable for thinning fast-drying synthetic coatings, especially suitable for spraying.

Low-boiling hydrogenated benzene Technical benzene is intended for coarse degreasing of metal objects, can be used in lighters and as fuel for gasoline pressure lamps.

Bone glue is intended for bonding, sizing, and especially for repairing and restoring old wooden furniture. Bone glue should be soaked for about 2 hours and then gradually heated until it completely dissolves.

For diluting epoxy or epoxyester coatings. S 6300 can only dilute those coatings for which this thinner is recommended by the manufacturer. It is most commonly used with two-component epoxy paints and varnishes.

For technical purposes, in the braking systems of trucks, for degreasing and removing dirt, for diluting alcoholic paints, for cleaning, and for alcohol stoves.

Low-boiling hydrogenated gasoline Technical gasoline is intended for rough degreasing, especially of metal objects, can be used in lighters and as fuel for gasoline pressure lamps.

Ammonia solution is used for cleaning, etching, and other technical purposes. Technical ammonia solution is a solution of synthetic ammonia in water.

Low-boiling hydrogenated benzene Technical benzene is designed for coarse degreasing, especially of metal objects, can be used in lighters and as fuel for gasoline pressure lamps.

Toluene mixture is intended for special purposes, e.g. for cleaning and degreasing surfaces before using adhesives.

The toluene mixture is intended for special purposes, e.g. for cleaning and degreasing surfaces before using adhesives.

The thinner is intended for diluting synthetic, nitrocellulose, and epoxy coatings. For spraying application, the thinner is intended solely for professional and industrial use.

As a thinner for varnish paints and oil-based glazing putties.

THINNER S6003 thinner is designed for diluting baking synthetic coatings, such as S2053, unless otherwise explicitly specified.

S 6005 is a thinner intended for thinning synthetic paints applied by spraying or dipping. The type of thinner according to the method of applying the coating is always indicated on the packaging of the individual coatings.

Acetone is intended for degreasing and cleaning metal surfaces before the application of coatings, for cleaning tools and equipment, and also as a special solvent, e.g. for nitrocellulose adhesives.

S 6005 is a thinner designed for thinning synthetic paints applied by spraying or dipping. The type of thinner according to the method of applying the coating is always indicated on the packaging of individual coatings.

The thinner is intended for thinning synthetic, nitrocellulose, and epoxy paints. For spraying application, the thinner is intended only for professional and industrial use.

Thinner for polyurethane coatings.

P 8500 is designed for cleaning spray guns and other tools contaminated by the use of coating materials (nitrocellulosic, synthetic, oil-based).

As a thinner for varnish paints and oil-based glazing putties.

Thinner for diluting nitrocellulose and synthetic coatings. Also used for washing tools and equipment, removing resins from wood surfaces.

It is intended for coarse degreasing, especially of metal objects. Highly flammable liquid and vapors.

For diluting epoxy or epoxy ester coatings. S6300 can only dilute those coatings for which this thinner is recommended by the manufacturer. It is most commonly used for two-component epoxy paints and lacquers.