BALtech

It is used, for example, for removing limescale, cleaning pipes and drains. Basic chemical raw material for generally known uses.

Rinse-free rust removal agent with a stabilizer for effectiveness, high efficiency in removing corrosion. The rust remover is applied by brushing, spraying, or immersion.

For technical purposes, in the brake systems of trucks, for degreasing and removing dirt, for diluting alcohol-based coatings, for cleaning and in alcohol burners.

Used for thinning oil and synthetic paints that dry in air, intended for application by brush. Added in portions with constant mixing.

It is intended for coarse degreasing of metal objects. Highly flammable liquid and vapors.

Thinner or solvent is used to improve the spreadability of paints, to clean brushes, and to remove old coatings. Thinner S6001 is suitable for diluting quickly drying synthetic paints, especially suitable for spraying.

S 6005 is a thinner designed for diluting synthetic paints applied by spraying or dipping. The type of thinner according to the method of applying the coating is always indicated on the packaging of the individual coatings.

Toluene mixture is intended for special purposes, e.g., for cleaning and degreasing surfaces before using adhesives.

Ensures the removal of frost and snow from vehicle windows, perfectly removes all impurities, eliminates grease from the glass, and leaves it crystal clear, providing excellent visibility.

The toluene mixture is intended for special purposes, e.g. for cleaning and degreasing surfaces before using adhesives.

Technical liquid intended for lighting in kerosene lamps.

As a basic binder for mixing fireclay adhesive mortar for construction, embedding fireclay elements, and repairing stoves, fireplaces, and other types of heating appliances.

Technical gasoline cleaner P6411 is primarily designed for cleaning and degreasing metal objects. Technical low-boiling hydrogenated gasoline.

Low-boiling hydrogenated benzene Technical benzene is intended for rough degreasing, especially of metal objects, can be used in lighters and as fuel for gasoline pressure lamps.

Ammonia solution is used for cleaning, etching, and other technical purposes. Technical ammonia solution is a solution of synthetic ammonia in water.

It is intended for coarse degreasing of metal objects in particular. Highly flammable liquid and vapors.

Technical liquid intended for lighting in kerosene lamps.

Thinner for polyurethane coatings.

Thinner or solvent is used to improve the spreadability of paints, to clean brushes, and to remove old coatings. Thinner S6001 is suitable for thinning quickly drying synthetic coating materials, especially suitable for spraying.

Low-boiling hydrogenated benzene Technical Benzene is intended for coarse degreasing especially of metal objects, it can be used in lighters and as fuel for gas-pressure lamps.

For thinning epoxy or epoxyester coatings. S 6300 can only be used for coatings for which this thinner is recommended by the manufacturer. It is most commonly used with two-component epoxy paints and varnishes.

Bone glue is intended for bonding, sizing, and especially for repairing and restoring old wooden furniture. Bone glue should be soaked for about 2 hours and then gradually heated until it completely dissolves.

Acetone is intended for degreasing and cleaning metal surfaces before the application of coatings, for cleaning tools and equipment, and also as a special solvent, e.g. for nitrocellulose adhesives.

Distilled water is intended for technical purposes, e.g., for radiators and car batteries, for steam irons and humidifiers, photographic practice. Conductivity max. 15 µ S.cm-1