Druchema Dispercoll D3 dispersive wood glue, applicator, 500 g

Dispercoll D3 is a glue for water-resistant bonding in class D3 (exterior without permanent contact with water), creating elastic joints with high strength, and does not affect the edges of machining tools. It is suitable for bonding wooden furniture in humid environments, for making outdoor windows and doors, floating floors in tongue and groove joints, parquet, and for gluing hard solid and exotic woods. The glue can be applied at temperatures above +5 °C.

Use in its original condition, (may be diluted with a maximum of 5% water). The glue does not change the color shade of the wood. Contact with metals that may cause color changes in the glue due to the pH of the adhesive, e.g., iron oxides, must be avoided. The glue is equipped with an applicator for bonding in tongue and groove joints; for larger areas, apply the glue to both parts with a brush or notched trowel, and after slight skinning, clamp or load with a force of 0.5 kg/cm².

• Water resistance class: D3
• pH: 3
• Dry matter: min. 52%
• Strength of the bonded joint: at exposure no. 1 min. 10 MPa; no. 4 - 8 MPa
• Time required before machining: manual - 3 hours after bonding
• Time required before machining: machine - 24 hours after bonding
• Open time: 7 minutes
• Drying time: 15 minutes
• The glue is water-dilutable.
• Does not contain organic solvents.

Yield:
150 - 300 g/1 m²

Instructions for use:
Use in its original condition, (may be diluted with a maximum of 5% water). The glue does not change the color shade of the wood. Contact with metals that may cause color changes in the glue due to the pH of the adhesive, e.g., iron oxides, must be avoided. The glue is equipped with an applicator for bonding in tongue and groove joints; for larger areas, apply the glue to both parts with a brush or notched trowel, and after slight skinning, clamp or load with a force of 0.5 kg/cm2.