Ceys Special Plastic glue for hard plastics, 30 ml

PlasticCeys is a welding adhesive suitable for creating permanent bonds in hard plastics. It is fast, transparent, and water-resistant. Due to its thixotropic properties, it has filling capabilities. It cannot be used on polyethylene, polypropylene, and teflon. For these materials, we recommend using Ceys glue for difficult plastics.

• Strong and durable
• Transparent
• Indoor and outdoor
• Fills and is water-resistant

For materials:
PVC, polyester, methyl methacrylate, plexiglass, ABS, SAN, rigid polyester, solid plastic seats. Not polyethylene, not polypropylene, not PTFE.

Application:
Repair of plastic parts in remote controls, deep fryers, vacuum cleaners, teapots, etc.

Instructions for use:
Thoroughly clean, degrease, and dry the surfaces to be bonded. Apply a uniform thin layer of adhesive to one of the bonded surfaces and press both parts together for several seconds. The bonded surfaces can be moved for a maximum of the first 3 minutes. Wait at least 3 hours before subjecting the bonded parts to load. Maximum strength is achieved after 24 hours.

Product safety warnings (H-statements)

• H225: Highly flammable liquid and vapour.
• H226: Flammable liquid and vapour.
• H312: Harmful to health in contact with skin.
• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.

Safety handling instructions (P-statements)

• P101: If medical attention is needed, have product container or label at hand.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P262: Avoid contact with eyes, skin, or clothing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501: Dispose of contents/container according to product instructions.