Druchema hydrophobic coating, 500 ml

Synthetic hydrophobic concentrate reduces soiling and absorbency, extends lifespan, protects against acid rain, and improves thermal insulation properties of porous silicate building materials. It is intended for coating, spraying, or soaking porous silicate materials such as plasters, concrete, aerated concrete, asbestos cement, baked roof tiles, or sandstone, etc., to which it chemically binds.

During application, the diluted solution penetrates the porous substrate, forming a colorless film with a significant water-repellent (hydrophobic) effect after drying while preserving the original vapor permeability. Dilution with water: plasters, concrete, asbestos cement 1:10 to 15, baked roof tiles - by spraying 1:20 to 30, by soaking 1:50 to 75. Apply to a dry and clean surface in such a quantity that the solution is absorbed by the material. The solution must not run off.

Product safety warnings (H-phrases)

• H314: Causes severe skin burns and eye damage.
• H318: Causes serious eye damage.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
• P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call the TOXICOLOGY INFORMATION CENTER/doctor
• P405: Store locked up.
• P501: Dispose of contents/container according to product instructions.