Lignostop Hobby V1042 against mold and fungus 500 ml spray

The preparation is used undiluted. In the case of wood protection, it must not be used to protect wooden toys and wood in contact with food, feed and drinking water.

Protection of masonry infested with mould:
a) Mould discolouration is not too dark and can be covered with the original paint - then just spray once or twice - apply the original paint after drying.

b) If the mould discolouration is too dark then the following is carried out: - disposal: spraying the affected area once - after approx. action, the dark discolouration is removed mechanically (or chemically - chlorine preparation). - prevention: after the mechanical (or bleaching) cleaning has dried, the infected area and its surroundings are treated again once or twice with proper spraying.
After drying (approx. 24 hrs.) - apply the original paint. The minimum dosage of the product on masonry is 160 ^g/m2 (1x to 3x spraying depending on the extent of infestation and the specificity of the masonry) - on wood 80 ^g/m2 (1x spraying). When applied to wood outdoors (cl. 3) It is recommended to cover the treated wood with a protective coating - protection against weather erosion.

The sprayer can be refilled with Lignostop Hobby - diluted 1:1 with water

Capacity:
^3m2/0,5 l - masonry, ^6m2/0,5 l - wood.

Storage:
The product should be stored in its original packaging, separately from food, beverages and feed at a temperature between +2°C and +35°C.Protect from frost.