Motip 04061 spray, zinc primer, 400 ml

Cold galvanization against corrosion. Excellent protection against corrosion for all iron metals, such as car bodies, exhaust systems, gates, machines, metal housings, fittings, fencing, etc. Particularly suitable for protecting welds and metals exposed to corrosion.

Features of Motip 04061 zinc primer spray:

• High-quality zinc coating with more than 90% zinc content in the dry film.
• Cathodic protection against corrosion for all bare metals.
• Resistant to the highest corrosion demands.
• High temperature resistance up to 350 °C.
• Fast-drying.
• Especially suitable for welding seams.
• Ideal for all outdoor metals that are prone to corrosion.
• Matte surface.
• Resistant to gasoline, chemicals, and weather influences.

Technical properties of Motip:

• Binder base: Epoxyester.
• Color: gray.
• Odor: solvent.
• Gloss level (at 60° angle measurement DIN 67530): matte: 0-5 gloss units.
• Efficiency: Depends on the consistency and color of the substrate: 400 ml is sufficient for approximately 1.25 - 1.75 m² for a covering layer.
• Drying time (at 20°C, 50% relative humidity):
• Dust resistant: approximately in 10-15 minutes.
• Non-sticky: approximately in 20-30 minutes.
• Temperature resistant: in 8-12 hours.
• Drying time depends on ambient temperature, humidity, and thickness of the applied coating.
• Temperature resistance: up to 350°C.
• Storage stability: 10 years, provided suitable storage conditions are met (=10°-25°C, relative humidity max. 60%).

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222+H229: Extremely flammable aerosol. Container is under pressure: may burst if heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with product instructions.