Pattex Total Fix PL70 White waterproof polymer-based adhesive for gluing, sealing and fixing 440 g

Surface preparation: the surface must be stable, free of dirt, dust and grease.

1. Cut off the tip of the cartridge above the thread.
2. Screw the application tip onto the cartridge and cut to the required angle and size. 
3. Insert the cartridge into the ejector gun.
4. Apply the adhesive to one of the surfaces to be glued. Press the glued surfaces together while the glue is still wet (approximately 15 min.). Fix heavy objects for at least 24 hours. Remove excess glue with a piece of cloth or technical gasoline. 

Application temperature: from +5°C to +40°C.
Temperature resistance: from -30°C to +80°C. Final strength is achieved after approximately 24 hours depending on application conditions (24 hours at room temperature). The adhesive is cured by moisture in the air. In the case of bonding non-absorbent materials, a longer curing time must be taken into account.

Technical data:
Colour: white. Methanol is released during curing. Density: 1,58-1,70 ^g/cm3. VOC<0,03 kg/kg. Once cured, dispose of the unconsumed contents at a location designated by the municipality for waste disposal.