Savo pool clarifier serves to flocculate impurities, 900 g

Savo Clarifier is a highly effective product for removing even the smallest impurities and cloudiness from pool water with a clarifying effect for sparkling clean water. The product serves to precipitate (flocculate) even very small impurities that filtration cannot otherwise capture.

Use in case the water is not clear even when chlorine products are properly dosed and the pH level is correct. After using the product, impurities will form clusters that can then be easily captured by filtration or settle to the bottom and can be vacuumed. Suitable for all types of pools.

Usage:
Savo Flocculant should be used if the water is not clear even with proper dosing of chlorine products and a correct pH value. The dosage depends on the quality of the pool water. Adjust pH using SAVO pH+ or SAVO pH- to a value of 7.1 – 7.5, check the level of free chlorine, and if necessary, add SAVO chlorine tablets or SAVO complex tablets.

Recommended dilution:
Depending on the intensity of the cloudiness, use 4 – 10 ml of the product per 1 m3 of water. While the filtration is running, slowly pour the product into the skimmer or dissolve it in a container with water and spread it over the surface. Then filter continuously for at least 1 day. Can also be used preventively.

Product safety warnings (H-statements)

• H290: May be corrosive to metals.
• H318: Causes serious eye damage.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P234: Keep only in original container.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P305+P351+P338+P310: IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
• P501: Dispose of contents/container according to product instructions.