Bio Golem S natural biological product for septic tanks and dry toilets with an increased content of microorganisms of 1 kg

The preparation is diluted (activated) with warm Water. The frequency and size of doses depend on the dosing phase (start, stabilization, maintenance) and the volume of waste mass.

Detailed doSage information is provided on the product packaging. The doSage information is only indicative, the amount and frequency of doses depends on the temperature, the amount of wasteWater, the amount and frequency of incoming pollution and with respect to specific conditions. Use the product at outdoor temperatures above 10 °C. When applying Bio Golem S, do not use disinfectants containing e.g. Chlorine.

Thedry bacteria and enzymes contained in Bio Golem S must be activated before use by mixing the product in lukewarm Water (30 °C - 40 °C). Never use hot Water for activation.

Activation
Mix the product 1:10 in lukewarm Water (30 °C - 40 °C) and leave it to rest for 30 minutes, after which time the mixture is ready for use.
DoSage frequency of doses duration of phase recommended doSage per 1 m3 of waste mass

1. phase - starter one time 1 week 100 - 200 g
2. stabilization phase - once a week for 3 weeks 80 - 100 g
3. maintenance phase 1x per month until the end of the season 80 - 100 g

100 g of preparation = 5 tablespoons. The doSage information is only indicative, the amount and frequency of doses depends on the temperature, the amount of wasteWater, the amount and frequency of incoming pollution and with respect to specific conditions.
Contents
a mixture of bacterial cultures, enzymes, nutrients and p^{a natural inorganic carrier.}

Capacity
1 kg of product up to 12 m3

In case of contact with eyes - rinse immediately with Water. If accidentally swallowed - rinse the oral cavity with Water, drink 0.5 litres of Water and do not induce vomiting. In case of contact with skin - wash immediately with plenty of Water. Seek medical attention if problems persist.