Ceys Montack Express double-sided mounting tape, 19 mm × 2.5 m

Double-sided tape with exceptional initial adhesion and high final strength. It allows you to attach all porous and non-porous materials to smooth or slightly uneven surfaces. The work is easy, clean, and quick. For indoor and outdoor use. 00% support with extreme initial adhesion and a reinforcing highly durable mesh. The MONTACK EXPRESS tape represents a double-sided adhesive tape with extreme initial strength and high final resistance. It is used to secure all types of materials, porous and non-porous, on smooth and slightly rough surfaces in both indoor and outdoor areas. It withstands temperature fluctuations and humidity well.

It is suitable for easy, clean, and quick installation of a wide range of elements: cable ducts and conduits, signage, identification labels, security systems, electrical cabinets, cladding, panels and boards, mirrors, hooks, or bathroom and kitchen accessories, …

• Excellent adhesion.
• Indoor – outdoor.
• Permanent bonding.
• Characterized by resistance to moisture and temperatures ranging from -10 °C to 75 °C.
• Clean and easy to use. Highly strong bond (25 kg/cm²).

For materials:
ADHERES TO ALL MATERIALS: wood, metals, plastics, stone, concrete, cement, tiles, expanded polystyrene, marble, and mirrors. Not suitable for PE, PP, and PTFE. Not suitable for polyethylene, polypropylene, PTFE, excessively coarse, brittle, or crumbling substrates, or dusty and anti-adhesive surfaces.

Instructions for use:
Clean the bonded surfaces with alcohol and dry. Apply the tape to the bonded object without touching the adhesive side with your fingers and cut it. Press the tape firmly and remove the protective film. Join in the desired position and press firmly. For better preservation of the tape, store it back in its original packaging.

Recommendations:
Avoid using polishing cleaners on the bonded surfaces before use. On uneven surfaces, apply the tape over the entire area and ensure maximum contact with the surface. It is not recommended for vertical joints heavier than 5 kg. Recommended application temperature +15 °C to 30 °C.