Ceys chemical anchor polyester, 300 ml, 2 + 1

Polyester-based chemical anchor for exceptionally strong anchoring in solid, hollow and brittle materials, such as bricks, concrete, cement, wood or natural stone. Cures in 6 minutes without expansion, making it a perfect choice for anchoring in areas at risk of substrate cracking. Does not create compressive pressure. The composition does not contain styrene or phthalates.

Features:

• Load capacity: 900 kg (M12 attachment to concrete substrate B25 or higher. Anchoring 5.8 galvanized zinc / A4-70).
• Tensile resistance: 560 kg/cm²
• Compressive resistance: 1080 kg/cm²
• Yield: 49 M10 anchorings per cartridge.
• Temperature resistance 80 °C to 110 °C.
• Optimal application temperature: 20 °C.
• Drying time depending on temperature.

Application:
It is designed for fastening and anchoring screws, dowels, threaded rods in braces, iron structures, etc. It can also be used to secure garden awnings, lamps, air conditioning units, radiators, tanks, railings, door fittings, TV mounts, satellite antennas, etc.

Suitable materials:
Solid, firm and porous substrates, brick, concrete, cement, natural and artificial stone, injection mortar, solid rock, masonry, galvanized steel, stainless steel, corrosion-resistant steel, wood.

Method of use:

1. Unscrew the cap and cut both bags below the ring.
2. Attach the mixing nozzle and insert it into the applicator gun.
3. Extrude the product until it has a uniform gray color. A chemical reaction occurs with increased temperature during the mixing of the mixture.

For HOLLOW materials:
(bricks, partitions, walls or carpenter windows and doors)

1. Perforate the surface
2. Clean the hole
3. Insert the mesh
4. Fill the mesh from the bottom
5. Insert the anchoring element

For MASSIVE OR SOLID materials:
(injection mortar, natural stone, galvanized steel, stainless steel and corrosion-resistant steel)

1. Perforate the surface
2. Clean the hole
3. Fill from the bottom
4. Insert the anchoring element

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P312: IF SWALLOWED: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTRE/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501: Dispose of contents/container in accordance with product instructions.