
Product for disinfecting surfaces contaminated with the SARS-CoV-2 virus, the active ingredient content exceeds 3 to 4 times the required concentration for virus elimination. The chlorine product is fully effective against viruses in cases of heavy contamination already after 5 minutes of action. The chlorine-free does not contain chlorine or alcohol, making it gentle on surfaces and leaving no stains. It is fully effective against viruses in cases of low contamination already after 5 minutes of action.
A liquid product intended for the elimination of viruses, bacteria, and molds in households, healthcare, food industry, veterinary facilities, and agriculture, especially on porous building materials (walls, plasters, concrete, wood, etc.) and textiles.
Scope of use:
A liquid product intended for the elimination of molds in households, healthcare, food industry, veterinary facilities, and agriculture, especially on porous building materials (walls, plasters, concrete, wood, etc.) and textiles.
Instructions for use:
Do not remove mold before application! Spray the affected areas from a distance of about 10 cm, and after 24 hours of action, mechanically remove the mold while wet (with a brush or cloth soaked in this product). In cases of heavy mold infestation, the process needs to be repeated. When in contact with lacquered surfaces, it is necessary to test on a small or hidden area first. Apply the chlorine-free antifungal product FungiSAN with a preventive effect against molds on a cleaned, disinfected, and dry surface of building materials. If the product is used on textiles or other materials that may come into contact with skin, thorough washing and cleaning of treated materials (removal of product residues) is required after treatment.
Contains:
10 g/kg quaternary ammonium compounds, alkyl(C12-C16)(benzyl)dimethylammonium chlorides; 5 g/kg dodecyl(dimethyl)ammonium chloride.
Warning:
Use biocidal products safely. Always read the label and product information before use.
Statement on the virucidal effectiveness of FungiSpray chlorine-free and FungiSpray chlorine:
FungiSpray Chlorine-free (including citrus and avocado variants)
The FungiSpray chlorine-free product has been on the market for almost 10 years. Its primary purpose is the elimination of molds. In 2016, the formulation of this product was tested at the Health Institute based in Ostrava - Testing Laboratory No. 1554. Tests were performed according to ČSN EN 14476+A1:2015, i.e., chemical disinfectants and antiseptics - quantitative test using suspension to determine virucidal effect in healthcare - testing method and requirements (phase 2 I stage 1). The tests demonstrate virucidal effectiveness against enveloped viruses Vaccinia virus (DNA virus) and BVDV (Bovine viral diarrhea virus - RNA virus) under conditions of low contamination after only 5 min. of action.
Coronaviruses are enveloped RNA viruses. The effectiveness test against BVDV demonstrates the possibility of using FungiSpray chlorine-free for disinfecting surfaces contaminated with the SARS-CoV-2 virus, which causes COVID-19 disease. The content of active ingredients in the preparation exceeds 3 times the necessary concentration for virus elimination, which can be documented by tests.
FungiSpray Chlorine
Similarly, as the FungiSpray chlorine-free product, FungiSpray chlorine was also tested in 2016 at the Health Institute based in Ostrava according to the same standard. The product demonstrated full virucidal efficacy under conditions of higher contamination after only 5 min. of action. The current content of active ingredients in the product exceeds the necessary concentration for virus elimination by 4 times, which can also be documented by tests.
From publicly available literature, it can be found the effectiveness of individual substances. It follows that the amount of active ingredients in both products almost exceeds the composition necessary for virus elimination by 10 times. Information on the notification of the biocidal product has been updated at the Ministry of Health of the Czech Republic, Department of Chemical Substances and Biocidal Products for both products. Both products are suitable for use for PT2 (Disinfectants and algicides not intended for use in humans or animals).
| Species: | sprej |
| Health hazard: | Health hazard |
Nebezpečnost pro zdraví - dráždivé látky
Nebezpečí
Může způsobit podráždění dýchacích cest. Může způsobit ospalost nebo závratě. Může vyvolat alergickou kožní reakci. Způsobuje vážné podráždění očí. Dráždí kůži. Zdraví škodlivý při požití. Zdraví škodlivý při styku s kůží. Zdraví škodlivý při vdechování. Rozkladem ozonu v horních vrstvách atmosféry poškozuje veřejné zdraví a životní prostředí.
Varování. Pokyny pro bezpečné zacházení
Zamezte vdechování prachu/dýmu/plynu/mlhy/par/aerosolů. Používejte pouze venku nebo v dobře větraných prostorách. Při vdechnutí: přeneste postiženého na čerstvý vzduch a ponechte jej v klidu v poloze usnadňující dýchání. Při požití: necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO nebo lékaře. Používejte ochranné rukavice / ochranný oděv / ochranné brýle / obličejový štít. Při styku s kůží: omyjte velkým množstvím vody a mýdla. Při zasažení očí: několik minut opatrně vyplachujte vodou. Vyjměte kontaktní čočky, jsou-li nasazeny, a pokud je lze vyjmout snadno. Pokračujte ve vyplachování. Při používání tohoto výrobku nejezte, nepijte ani nekuřte. Uchovávejte mimo dosah dětí.