
The versatile Pattex 100% adhesive finds application in every household. Due to its professional properties – high final strength, flexibility, and exceptional bond resistance – it is the ideal choice for experienced DIY enthusiasts.
Areas of use:
Tiles, Plaster, Zinc, Metal, Concrete, Aluminum, Polystyrene, Ceramic, Polyurethane foam, Glass, Stone, Leather, Plastics, PVC, Textiles, Cork, Iron, Wood, Steel.
Tips and tricks:
Adhesion on non-absorbent substrates:
When bonding on non-absorbent substrates (e.g. metal, glass), wipe both bonding surfaces with a damp cloth and apply only a thin layer of adhesive.
Adhesion on absorbent substrates:
Bond highly absorbent substrates (e.g. wood) with a larger amount of adhesive. In some cases, it's advisable to apply adhesive to both bonded surfaces.
Adhesion on painted surfaces:
You can also apply Pattex 100% to painted surfaces. In this case, we recommend performing a compatibility test with the given surface.
Instructions for use:
1. The surface must be clean, dry, free of dust and grease.
2. On non-absorbent substrates, apply a thin layer of adhesive to one bonding surface; on absorbent substrates, apply to both bonding surfaces. Adjust the amount of adhesive according to the absorbency of the substrate. The more absorbent, the more adhesive.
3. Immediately after applying the adhesive, fix the bonded surfaces for at least 30 minutes under even pressure on the entire bonded area.
4. The adhesive reaches its final strength after approximately 24 hours.
| Species: | ostatní |