PRESTO 1K thick-layer filler, gray, 500 ml

PRESTO 1K thick-layer filler is a modern 1K acrylic filler with the best filling properties. It is very suitable for leveling scratches and small imperfections on sanded surfaces.

Excellent adhesion to steel, zinc-coated steel, aluminum, polyester putties, and many types of plastics. Very smooth surface, re-coatable, and easy to sand.

Intended for professional use.

Application:

Remove rust, thoroughly clean the surface and sand it with suitable sandpaper. Degrease the surface and remove silicone. Shake for at least 2 minutes until you hear the mixing ball. Apply several thin layers from a distance of 15-20 cm. To achieve a smooth surface, overspray after about 15 minutes. Ready for sanding in about 60 minutes. After use, turn the spray nozzle down and spray several times.

Product safety warning (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respirable droplets. Do not inhale aerosols or mist.
• H222+H229: Extremely flammable aerosol. Container is under pressure: may burst if heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P260: Do not breathe dust/mist/gas/vapor/aerosol.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with product instructions.