Probazen Chlor Tablets Maxi water treatment product for pools 1 kg

1. Before applying the product, check the pH of the water with an appropriate tester
2. Adjust the pH value to 6.8-7.6 using pH MINUS or pH PLUS
3. In the case of hard water, stabilize the hardness of the water with a hardness stabilizer
4. Then carry out an initial chlorination with CHLOR START, all according to the instructions on these products
5. Then 1 CHLOR TABLET MAXI per 20-30 m3 of pool water is placed in the float or tablet tray. This amount should be sufficient to maintain the required concentration of 0.3-0.5 mg/l of active chlorine in the water for 5 to 10 days, depending on the factors that affect the amount of active chlorine in the water, such as air and water temperature, the intensity of sunlight and the pool load
6. We recommend supplementing the tablets with liquid flocculator and algae remover for optimal water quality.

Checking for the correct concentration of active chlorine and pH should be done regularly with a suitable tester.

If algae is present, a one-time water treatment with CHLOR SHOCK can be carried out according to the instructions on this product.

Follow the instructions for use. The product must not come into direct contact with pool liner, plastic or coating, it may discolour these materials and cause white spots. Do not mix with other chemicals. It must only be used for pool water treatment.