Probazen Multi tablets Maxi 5v1 water treatment agent for swimming pools 1 kg

1. Before applying the product, check the water pH with the appropriate tester
2. Set the pH value to 6.8-7.6 using pH MINUS or pH PLUS products
3. In the case of hard water, stabilize its hardness with the HARDNESS STABILIZER
4. Then perform initial chlorination with CHLOR START, following the instructions provided on these products
5. Then place in a floater or tablet dispenser 1 piece of MULTI TABLETS MAXI for 20-30 m3 of water in the pool. This amount should be sufficient to maintain the required concentration of 0.3-0.5 mg/l of active chlorine in the water for 5 to 10 days, depending on factors affecting the amount of active chlorine in the water, such as air and water temperature, intensity of sunlight, and pool load

The correct concentration of active chlorine and pH should be checked regularly with an appropriate tester.

The product already contains substances that prevent algae growth; however, in the case of algae occurrence, a one-time water treatment with CHLOR SHOCK can be performed according to the instructions provided with this product

Use disinfectants safely. Always read the label before use. Harmful to health if swallowed. Causes serious eye irritation. May cause respiratory irritation. Highly toxic to aquatic organisms with long-lasting effects. If medical attention is needed, have the container or label at hand. Keep out of reach of children. Avoid breathing dust. Prevent release into the environment. If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container as hazardous waste. Releases toxic gas when in contact with acids. Warning! Do not use together with other products. May release dangerous gases (chlorine). The product contains symclosene 960 g/1 kg, index number 613-031-00-5, UN 3077.