BIO-P2 je biologický přípravek na bázi bioenzymů určený k rozkladu tuků v odpadních systémech.
| Product type: | Natural product |
The BIO-P2 application liquid is applied by pouring it into the designated area (into the drain). It is necessary that the solution stays on the treated area for at least 8 hours. In case of completely blocked pipes, mechanical unclogging is necessary first. To avoid this particular problem with completely blocked pipes, it is advisable to use BIO-P2 as a preventive measure.
Preparation of the application fluid:
Dissolve and mix the contents of the bag in 2 l of warm water (approx. 30 - 40 °C ) and leave to activate for approx. 15 - 30 minutes with occasional stirring. Use the mixed solution within a maximum of 1 hour from the start of preparation.
Dosage:
100 g (i.e. 1 packet) / 1 drain (waste) / 2 l of warm water
Application notes:
Mix BIO-P2 in a plastic container with a non-metallic object.
It is recommended to apply the solution overnight or preferably at the weekend.
At least 24 hours after application, do not use any chemical, disinfectant, bleaching agents, acids, alkalis, the use of which substantially reduces the effectiveness of the product.
Store BIO-P2 in a dry place and protect it from freezing.
These data are for information only. The seller is not liable for damages caused by improper use of the product.