Bison Glas glass adhesive can also be used in combination with metals 2 ml

1. Glued parts must be clean, dry and degreased.
2. Apply the adhesive to one surface of the material to be bonded.
3. Immediately press together and fix.
4. Leave exposed to sunlight until the adhesive has cured (10 - 20 seconds).

The speed of curing depends on the intensity of daylight. In darkness and artificial light, the adhesive does not cure at all. The bonded joint reaches handling strength after 5 minutes and functional strength after 10 minutes depending on the intensity of sunlight. Remove uncured adhesive with acetone, curing adhesive only mechanically. Store in a dry, cool place and protect from daylight. Do not use at temperatures below + 10°C.

TIP:
Glue the glued object on a table near a closed window, open the window and allow UV light to cure. The more sunlight, the faster the reaction.

Keep out of the reach of children. Irritating to eyes, respiratory tract and skin. Avoid contact with skin and eyes. If eyes are affected, rinse immediately with water and seek medical attention immediately. If skin is affected, wash thoroughly with plenty of water. If swallowed, do not induce vomiting and seek medical attention immediately. Wear protective gloves.

Technical data sheet

Bison International B.V. has specialised in the manufacture of adhesives and sealants for over 70 years. The company's core strategy is a unique range of high quality products that is constantly being innovated and added to. Bison International B.V. now has over 350 products in its range, which it exports to over 65 countries worldwide.