HB-Lak Sokrat 2802 A construction dispersion for all mixtures, 1 kg

HB-Lak Sokrat 2802 A construction dispersion is used as a binder for the production of highly filled facade and interior paints, a binder for the production of dispersion plasters, as an impregnation and saturating agent for mineral substrates or dust-free treatment of construction elements. It is also used as a binding component in sealing coatings for concrete and as an additive in concrete and mortars for bonding tiles.

Procedure:
Pentrating all absorbent substrates (concrete, chipboard, eternit, etc.). Sokrat 2802 A is diluted in a ratio of 1 : 3 to 10 parts water (the most absorbent = most diluted). It is best applied to a dry substrate free of dust and mechanical impurities. The coating dries within 8 to 12 hours depending on the temperature and humidity. It increases the strength of concrete and reduces dust.

Sealing coating for concrete (dust-free treatment):
1 part by volume of Sokrat 2802 A is diluted with 10 parts water; then mixed with 4 to 5 parts cement. After thorough mixing, it is applied to the primed substrate.

Improvement of concrete or cement mortar properties:
Add 4 to 10 liters of Sokrat 2802 A to 100 kg of cement; adjust with water to the desired consistency.

Adhesive mortar for tiles:
In dry conditions, mix 2 parts washed sand with 1 part Portland cement; during mixing, add a solution of Sokrat 2802 A (1 part : 1 to 2 parts water) until the desired consistency is achieved. Do not soak the tiles or the material to be tiled beforehand!

Polymer mortar:
To 100 kg of lime hydrate (prepared from sand and lime in the usual ratio), add 10 liters of Sokrat 2802 A and mix with water. The mortar has increased adhesion to the substrate and high flexibility. It is suitable for masonry and especially for undercoating roofing.