
Silycon concentrate of methylsilanolate for hydrophobization of most light mineral well-absorbing surfaces (plasters, concrete, bricks, sandstone, limestone). Before application by spraying and coating, dilute with water in a ratio of 1:10 – 1:40 or at least 1:75 for soaking baths. Another use as an injection preparation for masonry against penetrating ground moisture.
Lukofobs are liquids based on silicone that serve to hydrophobize porous silicate building materials. Their application limits the absorbency of rainwater into the surface, reduces soiling and leaching of soluble components, prevents the action of acid rains, and preserves the thermal insulation of silicate masonry materials. The lifespan of hydrophobic treatments is 5 to 10 years and can be repeated.
Final surface protection for all porous silicate materials (plaster, gas-concrete, concrete, sandstone, bricks, fired or fiber-cement roofing) against weather influences. It is suitable only for well-absorbing, lighter substrates. It is applied after dilution with water in a single layer so that it is fully absorbed into the substrate.
| Species: | ostatní |
| Corrosive/Caustic: | Corrosive/Caustic |
Korozivní/žíravé
Nebezpečí
Může být korozivní pro kovy. Způsobuje těžké poleptání kůže a poškození očí.
Varování. Pokyny pro bezpečné zacházení
Nevdechujte prach/dým/plyn/mlhu/páry/aerosoly. Po manipulaci důkladně omyjte… Používejte ochranné rukavice / ochranný oděv / ochranné brýle / obličejový štít. Skladujte uzamčené. Uchovávejte pouze v původním obalu. Uchovávejte mimo dosah dětí.