
Pattex Total Fix vodovzdorný je montážní lepidlo s vylepšenou technologií na bázi Flextec polymeru. Je vhodné k lepení, tmelení a fixování. Jedná se o lepidlo s okamžitou přilnavostí Instant Tack, která zaručuje okamžité slepení s materiálem.
Rozsah použití:
Použití v interiéru i exteriéru. Na hladké a mokré povrchy. Savé i nesavé materiály. Jednoduchá aplikace při nízkých teplotách. Odolává otřesům. Neobsahuje isokyanát.
cihly, keramika, beton, dřevovláknité a dřevotřískové desky, překližky, hliník, kamenina, MDF, dřevo, PVC-U, sklo, plasty (u plastů doporučujeme provést test lepení), zrcadla, polykarbonáty a jiné. Není vhodný k lepení polyetylenu a polypropylenu.
Surface preparation: the surface must be clean, free of dirt, dust and grease. Glues even wet surfaces!
1. Screw the application tip onto the cartridge and cut to the required angle and size.
2. Apply the adhesive to the surface to be bonded in continuous strips.
3. Correctable within 2 minutes after application.
4. Remove excess glue with a piece of cloth or technical gasoline. 5. Fix heavy objects if necessary. 6. Once cured, the adhesive is waterproof, making it suitable for repairs and sealing in the sanitary area.
Consumption: approx. 11 m with 6 mm adhesive strip width. Final strength is achieved after 24 hours depending on the application conditions.
Technical data: colour: white. Density: 1.4 g/cm3. TOC: 0,6 kg/kg, VOC: 0,0 kg/kg. Once cured, dispose of the unconsumed contents at a location designated by the municipality for waste disposal.