Supermal lime coating 6 kg

The classic lime coating is a traditional mineral surface treatment intended for use on absorbent substrates in interiors and exteriors. It is especially suitable for cellars, garages, agricultural and technical buildings, farm buildings, or historical structures. Due to its high vapor permeability, it allows natural moisture regulation of the masonry and prevents the formation of condensation.

Properties:

• Traditional composition based on hydrated lime
• High vapor permeability – supports the drying of wet masonry
• Mineral base – without synthetic binders
• Matte, slightly structured surface

Usage:
Intended for application on lime, lime-cement, and clay plasters, natural stone, older mineral coatings, or unglazed bricks. Not suitable for plaster substrates or coatings based on synthetic resins.

Substrate preparation:
The substrate must be clean, cohesive, free of dust, grease, and non-cohesive parts. Thoroughly remove old coatings and efflorescence. If necessary, moisten the absorbent substrate with water to improve adhesion.

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have packaging or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call POISON CENTER/doctor
• P501: Dispose of contents/container in accordance with local regulations.