
AMARIT blue is used for shading coatings for greenhouses and hotbeds against the burning effects of sunlight. A protective coating that prevents the penetration and effects of intense sunlight.
Usage:
It is used for shading coatings for greenhouses and hotbeds against the burning effects of sunlight. Before use, the paint should be thoroughly mixed.
Procedure:
1.) For coatings, the paint is prepared by diluting with water in a ratio of 1 part paint to 1 to a maximum of 2 parts water.
2.) The paint is mixed again thoroughly and is ready for immediate use.
3.) The prepared paint must be stirred occasionally (possible sedimentation) and used within 24 hours.
4.) The application is performed with a brush or spraying in one or two layers.
5.) The freshly applied coating must be protected from heavy rain for at least the next 24 hours!
6.) The dried coating is resistant to rain, but can be removed mechanically (e.g., with a brush and warm water).
7.) The durability of the coating on glass is only expected to be seasonal.
8.) The ambient temperature and substrate must not fall below +5 C during application.
Coverage:
Approx. 25 - 40 m² / 1 kg of diluted paint for 1 coat.
| Species: | ostatní |
| Corrosive/Caustic: | Corrosive/Caustic |
Korozivní/žíravé
Nebezpečí
Může být korozivní pro kovy. Způsobuje těžké poleptání kůže a poškození očí.
Varování. Pokyny pro bezpečné zacházení
Nevdechujte prach/dým/plyn/mlhu/páry/aerosoly. Po manipulaci důkladně omyjte… Používejte ochranné rukavice / ochranný oděv / ochranné brýle / obličejový štít. Skladujte uzamčené. Uchovávejte pouze v původním obalu. Uchovávejte mimo dosah dětí.