UNIBAL impregnation oil O1000, 4 l

An oil-based impregnation agent made from linseed oil, primarily designed for the initial impregnation of wood, with excellent penetrating properties.

PRODUCT CHARACTERISTICS AND USE:
It is used primarily for the initial impregnation of wood, plasters, and other absorbent substrates, under further coats of oil-based, synthetic, or dispersion paints. It ensures perfect adhesion of top coats, thereby protecting the substrate from adverse weather effects.

Key properties:

• excellent wood penetration
• suitable for other absorbent substrates (masonry, paper)
• traditional oil coating

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free of resin residues before application. Wood with a high resin content (larch, pine) must be free of all resin exudates in advance, for example by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final
wood finish and the overall lifespan of the coating system. Mineral substrates must be matured for at least 28 days before application, must be dry and free of dust, and must not be contaminated with grease, petroleum products, and must be isolated from ground moisture.

DILUENT: BALTECH S6006

Theoretical yield: approximately 7 m²/ l for one layer depending on the absorbency of the substrate

APPLICATION PROCEDURE:

Before use, thoroughly mix the contents and thin as necessary. It is applied with a brush, roller, or by dipping onto the pre-prepared substrate.
Coloring wood:
  - 1× application of UNIBAL IMPREGNATION OIL O1000. After approximately 20 minutes, excess oil must be wiped off so that no shiny coat remains on the surface.
  - after 48 hours of drying, sand the surface with sandpaper
  - 1 to 2× application of base color UNIBAL COLOR OIL O2025
  - 1 to 2× application of top enamel INDUSTROL UNIVERSAL S2013 or LAZUROL WINDOW ENAMEL U2015

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P331: DO NOT induce vomiting.
• P501: Dispose of contents/container in accordance with the instructions on the product.