Den Braven Spray Adhesive, 400 ml

High-quality and versatile butyl-based adhesive. It can be applied at lower temperatures down to -5°C.

Properties of Den Braven Spray Adhesive:

• Excellent resistance to high temperatures, moisture, and aging
• Fast and high initial adhesion
• Butyl-based

Usage of Den Braven Spray Adhesive:

Great adhesion on various substrates such as: PP, PE, foam, polyester, metal, wood, fiberboard, cardboard, concrete, glass, textiles, leather, felt, cotton, etc.; For bonding 3D tapes; Usable also as a primer.

Substrate for Den Braven Spray Adhesive:

Must be clean, dry, solid, free of loose dust particles, grease, and oil.

Instructions for Den Braven Spray Adhesive:

Clean the substrate as thoroughly as possible and shake the can well. If the adhesive is applied on both sides, it is recommended to firmly press the bonded parts together after 30 seconds and for up to 10 minutes. If the adhesive is applied only to one side of the bonded parts, the parts need to be pressed together after 30 seconds and for 5 minutes. The exact curing time depends on the surrounding conditions and the thickness of the adhesive layer. Maintain an application angle of 45°. Adjustable spray width.

Cleaning Den Braven Spray Adhesive:

Material: immediately with technical benzine. Hands: soap and water, hand repair cream.

Product Safety Warnings (H-statements)

• H222: Extremely flammable aerosol.
• H229: Container is under pressure: may burst when heated.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H412: Harmful to aquatic life with long lasting effects.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container according to product instructions.