Modern adhesive with high strength based on MS polymers, which also allows for sealing. It cures by vulcanization with air moisture and creates a highly strong, elastic bond.
Properties
- Suitable for gluing and sealing a wide range of materials
- Allows for gluing even underwater (exclusively non-absorbent materials)
- Thin-layer gluing
- UV resistant, frost resistant
- High adhesion even to damp substrates
- Does not contain solvents, odorless
- After curing, it can be painted over (except for alkyd resins)
Uses
- Gluing mirrors, skirting boards, stair nosings, sills, etc.
- Gluing stainless steel, aluminum, copper, lead, glass, PVC, concrete, ceramics, wood, masonry, drywall, etc.
- Sealing in the industrial sector (automotive production, railways, aerospace) structural sealing, decoration, etc.
- For interior and exterior use
- On absorbent and non-absorbent substrates
How to seal:
- We push out the sealant using an applicator gun in thin strips
- We smooth it within 10 minutes after application
What it excels in:
- Gluing and sealing in one step
- Resistance to UV radiation
- Thin-layer gluing
- Is flexible
- Adheres to absorbent and non-absorbent substrates
- Easily paintable with colors after just 1 hour
- Does not contain solvents
- Temperature resistance after curing from -40 °C to +90 °C
What to watch out for:
- Clean substrate without grease, dust, and loose particles
- Does not bond PE, PP, PC, PMMA, asphalt, and resinous materials
- Glued items need to be properly fixed until the adhesive has cured
Hazard identification:
EUH208 – Contains Trimethoxyvinylsilan & N-(3-(trimethoxysilyl)propyl)ethylenediamine & 1,2-Ethanediamine, N-[3-(dimethoxymethylsilyl)propyl]- & Dioctyltinbis(acetylacetonate). May cause an allergic reaction. EUH210 – Safety data sheet is available upon request.
Product safety warnings (H-statements)
- H226: Flammable liquid and vapors.
- H332: Harmful if inhaled.