Industrol S2013 universal gloss topcoat for metal and wood, 5450 khaki green, 750 ml

Synthetic glossy top coat for wood and metal

CHARACTERISTICS AND USE:

The product is intended for glossy topcoats on metals, wood, and materials such as masonry for outdoor and indoor use. The substrate must always be treated with a suitable primer. The product has excellent coverage, high gloss, and very good weather resistance. It has good flow and workability. It is available in a wide range of shades. The product has long-term storage stability during which there is no change in the functional properties of the coating. The product is suitable for coating fences, doors, frames, window sills, small structures and industrial items, wooden furniture and cladding, garden furniture, washable and abrasion-resistant wall coatings.

Key properties:

• Long-term resistance to weather conditions
• Stable gloss
• Urethane binder

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, free from resin residues before application. Concrete or masonry substrates must be dry, cohesive, clean, well-cured (usually 4 – 6 weeks), and structurally insulated against ground (bottom) moisture. Metal substrates must be clean, dry, free from grease, rust, and dust, mechanically cleaned. Absorbent substrates must be treated with a suitable primer, and possibly coated with a suitable base material. Metal substrates must be treated with a suitable anti-corrosive base material. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 14 - 16 m2/l in one layer

WORKING PROCEDURE:

Before use, thoroughly mix the contents and dilute if necessary.

Coating of metal items:
1.) 1x PRAGOPRIMER STANDARD S2000 paint or FORMEX BASE FOR GALVANIZED S2003, PRAGOPRIMER UNIVERSAL S2035
2.) local filling with filler, sanding the filled area with sandpaper
3.) 1x PRAGOPRIMER STANDARD S2000 paint or PRAGOPRIMER UNIVERSAL S2035
4.) sanding with sandpaper no. 280-320 wet
5.) 2 to 3x INDUSTROL UNIVERSAL S2013 paint

Coating of wooden items:
1.) 1x soak with Lazurolem Classic S1023, drying time 24 hours.
2.) 1-2x PRAGOPRIMER PLUS S2070 or LAZUROL WINDOW BASE S2060 paint.
3.) 2-3x INDUSTROL UNIVERSAL S2013 enamel. Each coat of enamel must dry for at least 24 hours (20 °C).

You may find it useful to have covering materials, such as paper adhesive tape or covering foil, possibly sanding papers. Don't forget about brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see dangerous substances). May cause an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be formed when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapour.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapours/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell
• P314: Get medical advice/attention if you feel unwell.
• P501: Dispose of contents/container in accordance with product instructions.