Primacol Decorative concrete paint, Elbrus, 8 kg

Decorative paint based on mineral binder. Easy application allows you to create the effect of vibrated concrete (smooth, glossy) as well as a surface with characteristic bumps, imperfections, and indentations. Ideal for modern interiors of public and residential buildings, especially for buildings in an industrial style. Perfectly complements wood, glass, and shiny metal. Masks minor surface irregularities.

Features of Primacol Decorative Elbrus concrete paint:

• Mineral decorative paint,
• easy application,
• effect of raw concrete,
• modern interior.

Coverage:

1.5 – 2.5 kg/m2 (2 layers). The coverage of Concrete paint depends on the absorbency and preparation of the substrate, the thickness of applied layers, the effect executed, and even the contractor. Tools: roller, trowel.

Substrate preparation:

1. The substrate should be dry, free of dust, grease, and other impurities. Residues of paint and plaster and other layers not bonded to the substrate must be removed. Apply a protective and primer layer with the deeply penetrating agent Primacol Kontakt Grunt.
2. You can apply concrete paint on cement, lime, and lime-cement plasters and after suitable preparation on plasterboard. Before applying the paint, the surface should be protected with one layer of Kontakt Grunt to increase its adhesion.
3. Warning! Concrete paint does not tolerate gypsum well. In the case of gypsum plasters or any gypsum surfaces, e.g., treated with gypsum spatulas, it is necessary to apply two layers of Kontakt Grunt to isolate the surface.

Application:

Before use, thoroughly mix the product. During application, stir the paint often. Work should be carried out at a temperature >5 °C, far from strong heat sources. Do not allow the paint to dry unevenly and too quickly.

Apply the paint using a roller on the surface up to 1 m2 and then adjust with a trowel. This method allows working with sufficiently moist surfaces and surfaces that slightly mold. Check the degree of drying of the paint; if necessary, apply paint in areas that need filling.

Suggestions for decorative effects:

Effect of vibrated concrete (smooth, glossy surface): Apply the first layer with a roller and adjust with a trowel. Let the paint dry only slightly (the paint should still be moist but should not deform under the influence of a flatly positioned trowel). Then apply the second layer with a roller and immediately smooth it with a trowel (work in a flat manner). During drying to achieve a smooth surface, wipe the surface with the flat edge of the trowel. The intensity of the wiping will determine the final glossy effect and the darkening of the surface. Do not wipe the surface for too long, as this may cause rolling or peeling of the paint. After 24 hours, wipe the wall with a soft brush to stabilize the particles so that the effect is stable.

Effect of concrete with indentations (matte surface): Apply the first layer with a roller and adjust with a stainless steel trowel according to the grain thickness. Let dry for 12-24 hours depending on the temperature and humidity. Apply the second layer also with a roller. Immediately adjust irregularly with a trowel. During adjustment, characteristic indentations and irregularities are formed. For this effect, they are required - creating the characteristic appearance of raw concrete. If necessary, you can add paint in places. After achieving the desired effect, let it dry for 24 hours. Then wipe the area with a brush to stabilize any loose particles so that the effect is stable.

Concrete paint allows for various decorative effects depending on the method of application and the contractor's ingenuity. It can be tinted using dyes from the Primacol Decorative range.

Securing effects:

The surface should be protected using products from the decorative range Primacol Decorative. This will prevent grain falling out and facilitate cleaning. Apply decorative varnish gently and evenly in a thin layer using a brush or roller. If necessary, apply a second layer.

ADDITIONAL INFORMATION AND INSTRUCTIONS:

For coating the entire area, we recommend using products from one production batch. Otherwise, it is necessary to mix the contents of all packages in one container. The color displayed on the packaging may differ from the actual color due to printing options and cannot be a reason for a complaint. To determine the color accurately, ask the seller for a sample with actual coats.

Store at a temperature from 5 to 25 °C, in a tightly closed container and do not expose to sunlight. Next layer after 24 hours.

Warning:

Irritating to skin. Causes serious eye damage. Keep out of reach of children. Use protective gloves/protective clothing/protective eyewear/face shield. IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IN CASE OF SKIN CONTACT: Wash with plenty of water and soap. Dispose of contents/container at a hazardous waste collection point or hand over to an authorized person for waste disposal. Hazardous substances: calcium hydroxide (slaked lime).

Product safety warnings (H-sentences)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.

Instructions for safe handling (P-sentences)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P405: Store locked up.
• P501: Dispose of contents/container according to product instructions.