Primacol Decorative Concrete Paint, Mont Blanc, 8 kg

Decorative paint based on mineral binder. Easy application allows you to create the effect of vibrated concrete (smooth, glossy) as well as a surface with characteristic bumps, imperfections, and indentations. Ideal for modern interiors of public and residential buildings, especially for buildings in industrial style. Perfectly complements wood, glass, and shiny metal. Masks minor surface irregularities.

Properties of Primacol Decorative Mont Blanc Concrete Paint:

• Mineral decorative paint,
• easy application,
• raw concrete effect,
• modern interior.

Coverage:

1.5 – 2.5 kg/m2 (2 layers). The coverage of the Concrete Paint depends on the absorbency and preparation of the substrate, the thickness of the applied layers, the performed effect, and even on the applicator. Tools: roller, trowel.

Preparation of the substrate:

1. The substrate should be dry, free of dust, grease, and other impurities. Residual paint and plaster, and other layers not bonded to the substrate must be removed. Apply a protective and primer coat using the deeply penetrating product Primacol Kontakt Grunt to the substrate.
2. The concrete paint can be applied to cement, lime, and lime-cement plasters and, after appropriate treatment, to drywall. Before applying the paint, the surface should be primed with one layer of Kontakt Grunt to enhance its adhesion.
3. Warning! Concrete paint does not tolerate plaster well. In the case of plaster finishes or any plaster surfaces, e.g., treated with plaster spatulas, it is necessary to apply two layers of Kontakt Grunt to isolate the surface.

Application:

Before use, thoroughly mix the product. During application, frequently stir the paint. Work should be done at temperatures >5 °C, away from strong heat sources. Do not allow the paint to dry unevenly and too quickly.

Apply the paint using a roller to an area up to 1 m2 and then adjust with a trowel. This method allows working with sufficiently moist surfaces and surfaces that are slightly moldable. Check the degree of drying of the paint; if necessary, apply paint where additional coverage is needed.

Suggestions for decorative effects:

Vibrated concrete effect (smooth, glossy surface): Apply the first layer with a roller and adjust with a trowel. Allow the paint to dry slightly (the paint should still be wet, but it should not deform under the influence of a flat trowel). Then apply a second layer using a roller and immediately smooth with a trowel (working in a flat manner). During drying, to achieve a smooth surface, wipe flat with the edge of the trowel. The intensity of wiping will determine the final glossy effect and the darkening of the surface. Do not wipe the surface too long, as it may lead to rolling or peeling of the paint. After 24 hours, wipe the wall with a soft brush to strengthen the free particles, ensuring the effect is stable.

Concrete effect with indentations (matte surface): Apply the first layer with a roller and adjust with a stainless steel trowel according to the thickness of the grain. Allow to dry for 12-24 hours depending on the temperature and humidity. Apply the second layer also using a roller. Immediately adjust irregularly with a trowel. During adjustment, characteristic indentations and irregularities are formed. This effect is required as it creates the characteristic appearance of raw concrete. If necessary, you can add paint in places. After achieving the desired effect, allow to dry for 24 hours. Then wipe the area with a brush to tighten the loose particles, ensuring the effect is stable.

The concrete paint allows for various decorative effects depending on the method of application and the ingenuity of the applicator. It can be tinted using pigments from the Primacol Decorative range.

Securing effects:

The surface should be protected using products from the Primacol Decorative range. This will prevent the shedding of particles and facilitate cleaning. Apply the decorative varnish gently and evenly in a thin layer with a brush or roller. If necessary, apply a second layer.

ADDITIONAL INFORMATION AND INSTRUCTIONS:

For coating the entire area, it is recommended to use products from the same production batch. Otherwise, it is necessary to mix the contents of all packages in one container. The color displayed on the packaging may differ from the actual color due to printing capabilities and cannot be a reason for complaint. For precise color matching, request a sample from the seller with actual coatings.

Store at a temperature of 5 to 25 °C, in a tightly closed container, and do not expose to sunlight. Apply another layer after 24 hours.

Warning:

Irritates the skin. Causes serious eye damage. Keep out of reach of children. Wear protective gloves/protective clothing/protective eyewear/face shield. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container in accordance with local regulations or hand over to a qualified person for waste disposal. Hazardous substances: calcium hydroxide (slaked lime).

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P405: Store locked up.
• P501: Dispose of contents/container according to product instructions.