Het Hetline San Active antifungal paint, 1.5 kg

Interior paint treated with a biocidal agent against mold is recommended for rooms with higher humidity and poor ventilation, such as bathrooms, basements, etc., where there is a higher risk of mold formation.

• higher resistance to mold
• suitable for coatings on renovation plasters
• high whiteness 95% (MgO)
• abrasion resistance when dry
• excellent vapor permeability
• significant covering power and spreadability

Coverage:
6 - 10 m²/kg in one layer depending on the absorbency and texture of the substrate and thickness of the applied layer. Drying time at least 4 hours at 20 °C and 60% relative humidity.

Usage: 
For interior coatings of walls and ceilings, lime, lime-cement, gypsum-lime and gypsum plasters, drywall, fiberboard and wood fiberboard panels, plasters with acrylic binder, renovation plasters, concrete panels and monoliths, specially designated paper wallpapers, fiberglass wallpapers, etc. Also suitable for application on substrates with a combination of, for example, mineral plasters and drywall. The paint is treated with a biocidal agent, and its coating film is thus better protected against mold compared to regular paints.

The paint is therefore suitable for rooms with higher humidity and poor ventilation, such as bathrooms, basements, etc., where there is a risk of mold formation. The coating creates a matte, highly vapor-permeable surface resistant to abrasion with dry materials, meeting the requirements of WTA CZ directive No. 2-9-04/D, table 4, limiting the use of covering layers on renovation plasters in terms of permeability for water vapor. The product meets the requirements for coatings on surfaces that may come into indirect contact with food (coatings for food storage areas, dining rooms, kitchens, etc.), but must not be used on surfaces that are in direct contact with food. The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can temporarily withstand temperatures around 70 °C.

Application:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large area application – spraying AIRLESS, HVLP. When spraying, it is advisable to conduct tests on specific equipment beforehand.

Warning:
Ensure adequate ventilation during application in enclosed spaces while painting and drying. Flush affected eyes with water. Seek medical attention if difficulties persist. If swallowed, rinse mouth with water. Wash contaminated skin with water and soap.

Warning:
Use biocidal products safely. Always read the label and product information before use.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P270: Do not eat, drink, or smoke when using this product.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P501: Dispose of contents/container in accordance with the instructions on the product.